LINEAR ELECTRIC MODULATING ACTUATOR

Provided with series 51 single-chip as main control unit, the control of electric actuator is more flexible and reliable

The product characteristics are as following:

1.Provided with series 51 single-chip as main control unit, the control of electric actuator is more flexible and reliable.

2.Provided with perfect protection circuit, the open and close directions are interlocked to prevent it from motor overheat, over torque and over travel.

3.AC contactor replaced by solid state relay, the valve motor can start 1200 cycles per hour within the range of temperature rise, and service life of valve motor is prolonged.

4.Sealed in bellows or sleeve, and lubricated with thin oil, screw rod and nut of the electric linear actuator will hardly get stuck, and the service life is prolonged.

Representation of Product Type

1	2	-	3	/	4	/	5	6	7	8	9
ZBTZ												Product Type           See  table1
	2	-										Output Thrust N
			3	/								Output Speed mm/s
					4	/						Travel mm
							5					Connecting times: cycles/hour (four specifications: 100, 320, 630, 1200)
								6				Signal  S: 4~20mA;  SI: 0~10mASV: 0~5V
									7			Symbol of flameproof type: B
										8		Installation mode Integrated; separated
											9	Electric motor,  Y : single phase;    without letter: three phases

For example: ZB1TZ160001/40/320SBZ represents the linear electrical actuator with output thrust of 16000N, output speed of 1 mm/s, travel of 40 mm, connecting times of 320 cycles/hour, signal of 4~20mA, explosion-proof type (flameproof type), integrated model.

3.Service Environment and Main Technical Specifications

Service Environment

1.  Power Supply: three phases: 380V±10%; 50Hz±1%; single phase: 220~230V 50Hz

2.  Temperature: integrated model -40~+55; separated model -40~+70; electric control box 0~50

3.  Relative humidity: electric actuator≤95%, electric control box 10%~70%

4.  Input signal:420mA DC;  010mA DC 05V DC;  input resistance: 250Ω 

5. Output signal: 4~20mA DC

6.Dead zone: 1%~12.5% adjustable

7. Motion forbidden time: 2s~25s adjustable

8.Duty time: S5, minimum load held ratio 25%, maximum operating times 1200 cycles/hour

9. Protection class: IP55 (IP67 for specific order, the electric control box of separated model can be only used indoor

 

GENERAL DESCRIPTION

ZBTZ linear electric modulating actuator is a new generation electric actuator for control valve. In its design, we have assimilated the strongpoint of the products of the same type we can find at home and abroad. This series of products can be used with model III and model II instruments and model S auxiliary control unit, they can precisely and reliably control gate valve, isolating valve, throttle valve and all sorts of control valves. They can apply to closed-loop control system of industrial process. They mainly come in to service in the area of power station, metallurgy, chemical industry, sewage treatment, ventilation, air conditioning and so on. These products have two models according to working environment: flameproof model and common model; two types according to structure and frame: integrated type and separated type. For the separated type, the digital servo amplifier and the actuator have been installed separately; for the integrated type, the servo amplifier has been installed inside the actuator. The performance of these products meets with the requirements of Std. JB/T8219-1999 Electric Actuators for Industrial-process Measurement and Control Systems. For flameproof model, the performance satisfies the requirements of Std. GB3836.1-2000 Electrical Apparatus for Explosive Gas Atmospheres Part 1: General Requirements and Std. GB3836.2-2000 Electrical Apparatus for Explosive Gas Atmospheres Part 2: Flameproof Enclosure d.

  

Note: Output speed can be changed as special supply according to users requirements

LINEAR ELECTRIC MODULATING ACTUATOR